Question: Is there an actual manual online to show how to operate these cams?
Answer-
"What you may want to check first is to see what USB mode your camera is set on. On mine it has two settings, one for "mass storage" and one for "webcam." Make sure its set to mass storage, this allows you to just open up a folder and view all your pics, and you can copy and paste them to your computer. Switching modes is a bit of a task: first press the menu button, then push the little joy stick down, and scroll down to USB mode, then swich it, and press the menu button again. If you have it on this mode and it still doesn't work, then it'll probally take a little more of a complicated answer. What operating system are you using." - clay
Actually, for me- I just connect the USB wire thing from the camera *OFF* to the USB (computer) then turn on the camera. The camera/webcam software will turn ON (showing the icon on the taskbar) and will open a folder. If nothing then go to your "My Computer" folder and you'll might see camera/webcam folders in there.
SVP HDDV 2500 B-
1) Connect the wire from Camera to USB (computer)
2) Turn ON the camera
3) See the red square color "PC"on the camera, click the button.
4) PC Mode- it will show *PC Camera* and *Mass Storage*. You want PC Camera - click on it.
5) Computer should start opening up the webcam software/folder. It might will ask you what program to open the webcam.
3 comments:
If you are looking for digital camera cases, digital camera lenses or hd camcorders. Check out Megacameras.com
Too bad these SVP cameras are shit. Everytime I plug mine up while attempting to use it as a Webcam, it always says "CHARGING" but of course mass storage works fine.
It doesn't stay on long enough to install the drivers.
What a POS.
HORRIBLE PROGRAMMING ON THESE CAMERAS.
whoah this blog is fantastic i like reading your posts.
Keep up the good work! You already know, many individuals are searching around for this information, you can aid them greatly.
Also visit my page - webpage ()
Post a Comment